.38 SNFX1204 - KAPR 88° / 26° - 8 cutting edges
The .38-SN12 is a dedicated face finishing milling cutter made for SMG K, P and H and supports SMG M.
The double-sided inserts with F tolerance provide eight edges per insert and is available in two insert types (88° and 27°). Dedicated for finishing of open surfaces with SNFX1204ZZ inserts or close to walls or fixturing’s with the SNFX120408PZ inserts, the system shows peak performance in cast iron, steel and hardened steel. The SA - fixed pocket version is a plug and play solution. Setting up cutters can often be a daunting and costly task. With the fixed pocket variant, setting up is easy and fast. No extra steps are needed. After choosing the insert, you can start over with an excellent run-out.
The CSA - hybrid version provides extra versatility. The cassettes are not mandatory to be set, but can be adjusted to the application needs. When facing challenging burr formation or weaker set-ups, the hybrid variant is your go-to. The HSA adjustable version achieves highest precision and is ideal when you having highest requirements on the surface quality. Adjust the run-out to the μm.